Don’t Put Fish Directly into the Pan When Frying

– Step 1: Heat the pan thoroughly to let any residual moisture evaporate completely.

– Step 2: Add oil to the pan and heat it until it reaches a high temperature.

You’ll know it’s ready when you can feel a distinct heat rising from the surface.

– Step 3: add the fish.

This method prevents the fish from releasing water upon contact with hot oil, which helps avoid sticking to the pan and keeps the fish’s skin intact during frying.

Steps to Fry Fish Properly

Ingredients: Fish, ginger, water, cooking oil, and paper towels.

– Step 1: Scale the fish thoroughly and removing the gills. Cut open the belly, remove all the innards, and clean the fish properly.

– Step 2: After cleaning, the fish will have a lot of moisture on its surface. If fried in this condition, it will cause oil splatter and stick to the pan. Use paper towels to pat the fish dry, removing as much moisture as possible. Set the fish aside for later use.

– Step 3: Cut a thick slice of ginger and set it aside. Heat the pan until it’s hot, then turn off the heat. Use the ginger slices to rub the bottom and sides of the pan thoroughly. This step creates a non-stick effect, making it easier to fry the fish without sticking.

– Step 4: Turn the heat back on and add an appropriate amount of cooking oil. Once the oil is hot, carefully place the fish into the pan. Use medium heat to fry the fish slowly. Avoid using high heat, as this can burn the outside while leaving the inside undercooked.

– Step 5: After placing the fish in the pan, avoid flipping it too often, as this may cause the fish to break apart. Let one side cook until it is golden and crispy before flipping to the other side. Once both sides are cooked evenly, remove the fish and place it on a plate.

Tips and Tricks:

Dry the fish: before frying, always pat the fish dry with paper towels to prevent oil splatter and sticking.

Use ginger: Rub ginger on the pan to create a temporary non-stick layer and also add a subtle aroma, reducing the fishy smell.

Moisture on the fish is the main cause of oil splatter, which can cause burns and a messy kitchen. Also, wet fish tends to stick to the pan, making it more likely to break apart. When preparing the fish, ensure the belly is cleaned thoroughly, and the black membrane is scraped off to reduce the fishy odor. Dry the fish’s surface completely before frying to keep the skin intact and achieve a crispy, flavorful result.

When the pan is hot, rub fresh ginger slices all over the surface to create a temporary non-stick coating. This not just prevents the fish from sticking but infuses the dish with a fragrant ginger aroma, which helps neutralize the fishy smell.

Rub the ginger, and then pour in the oil, let it heat up, reduce the heat to low, and then slowly place the fish into the pan for frying. The result will be crispy, delicious fish with an enticing hint of ginger aroma.